Product Features:
1. Automatic system voltage identification
2. Charging program options for sealed, GEL and flooded lead-acid
batteries and lithium batteries are available.
3. An upgraded 3-stage PWM charging algorithm is adopted.
Application of an equalizing charge to the battery periodically or
when over discharged can effectively prevent the battery from
non-equalization and sulfuration, thus extending the battery's
service life (with the exception of GEL and lithium batteries).
4. With temperature compensation employed, charging parameters can
be automatically adjusted (with the exception of lithium
batteries).
5. A wide range of load working modes facilitate the product's
application to different types of street lights and monitoring
devices.
6. The product provides overcharge, over-discharge, overload
protection, as well as short-circuit and reverse-connection
protection.
7. By virtue of an advanced load starting method, large-capacitance
loads can be started smoothly.
8. A range of parameter settings and power-down saving functions
are available, thus requiring no repeated setting.
9. The product provides a dot matrix graphic LCD screen and a
human-machine interface with 2 keys.
10. The user-friendly design of browser and dynamic interfaces
ensures convenient and intuitive operations.
11. (An optional communication function) provides a RJ12 data port
(output of TTL232 level or bluetooth signals), with the data
adopting the standard Modbus protocol, and can be used together
with our upper computer monitoring software or mobile phone APP.
12. Boasting an industrial grade design, the product can function
well in various tough conditions.
13. It features a backlit display, and the backlight will be turned
on with a key pressed and turned off over a period of time.
14. TVS lighting protection is adopted.
Product Parameters:
Model | HP2430N/2440N | Remarks |
Rated current | 30A/40A | |
System voltage | Automatic recognition of 12V/24V | Default: automatic identification |
| Manual setup | |
Rated power | 12V/450W 24V/900W | 12V/600W 24V/1200W | |
No-load loss | < 22mA/12V;< 16mA/24V | The lower the system voltage, the smaller the no-load loss. |
Max. Solar energy input voltage | <55V | |
Max. voltage at the battery end | <34V | |
Battery type | Parameters | |
| Flooded FLD | Sealed SLD | GEL GEL | Lithium LI | Default SLD |
Temperature compensation | -3.0mV/℃/2V | - | |
Light control voltage | Light control on 5V, light control off 6 V (light control on plus 1
V) | ×1/12V; ×2/24V; |
Light control judgment time | 10 minutes | |
USB function | Yes | |
232 Serial port communication function | optional | |
Over temperature protection | When temperature is above 60℃,charging function is turned off, and the function is recovered when
temperature is below 55℃; When temperature is above 70℃,load starting function is turned off, and the function is recovered
when temperature is below 60℃ | |
IP protection rating | IP30 | |
Protection functions | Battery plate reverse connection protection, a battery reverse
connection protection, charging battery board short circuit
protection, charging the battery open circuit protection, charging
over current protection, overload protection, load short-circuit
protection controller and over temperature protection. | |
