Features of SR-MT2410
1. Adopting double crest or multi crest tracing technique,used for
the condition when a part of solar panel is under shadow or parts
of panel isdammage
2. Built-in maximum power point tracking algorithm which could
promote the energy utilization efficiency of pv system.The charging
efficiency is 15%~20% higher than PWM mode
3. It can find out the best working point of I-V curve within 1
minuite,the MPPT efficiency could reach to 99.9%.
4. Adopting advanced digital power supply techniques which makes
the energy conversion efficiency reach up to 97%
5. Four charging stages:MPPT-equalizing charge-boosting
charge-floating charge
6. With current-limiting charging mode.When the power of solar
panel is oversized,the controller will lower charging power
automatically,which enable the system to work under the rated
charging current
7. Have the fault code indication,it helps user confirm the rated
charging current.
8. Various load control methods.could recognize day and night
qutomatically.
9. Various system protection functions.including
over-charge,over-discharge,over-dischage,over-load,over-heat,battery-reverse
connection and short-circuit protection eyc.
Application
Solar Station System
Solar power station systems are typically used for regional
centralized power supply, such as village, island, fields
monitoring and so on. Also the power level range is between
kilowatts to hundreds kilowatts.
Solar Home System
Solar home system are typically used for home photovoltaic power
generation system, to solve electricity demand of none power or
unstable power region. Also the power level rage is between hundred
watts to kilowatts.
Solar RVs/Vessels System
Solar RVs/Vessels system are typically used for reducing the RVs
and the vessels electricity cost, by setting up solar system to
assist gasoline/diesel power generator.
Solar Street lights System
Solar Street lights System are typically used for street lightning
of cities, villages, the intelligent streetlight system will remote
monitoring all street lamps to reduce the operation and maintenance
costs of system.
Hybrid Energy System
The Hybrid energy system contains solar, wind, diesel and city
electricity energy system. The system will meet the load demand of
electricity in villages, islands, and telecom stations to reduce
the system cost and improve the replenishment ratio of system.
Installation and use instruction of SR-MT2410
1. Fix the controller: Fix the controller onto the surface of the
specific place. Keep a certain distance between the controller and
fitting surface to assure heat dissipation
2. Wire preparation: Adopt the wire matching the current,plan the
length of wire, strip 5mm insulation of one side of the controller
terminal and try to decrease the length of the connected wire so
that a reduction in electrical loss.
3. Connect to the battery: connect the battery wire to the
controller firstly, Pay attention to the “+” and “–”, in case of
reverse connection. If connected well, the indicator light will be
on. Otherwise, please check the connection. If reverse connection,
controller will not working but not damage the controller.
4. Connect to the solar panel: Pay attention to the “+” and “–”,
not reverse connect. If ample sunshine, controller will show
charging mode. Or should check the connection is right or wrong. If
solar panel under the sunshine will produce voltage immediately. If
use 24V or more than 24V system, the solar panel voltage will
exceed to body safety voltage, when use please prevent you self
from electric shock.
5. Connect Load:Connected the load to controller,make sure the
current cannot over the rated current, and notice the positive and
negative electrode. Prevent the system from reverse connect.
Parameter of SR-MT2410
Model | MT2410 |
System voltage | 12V | 24V |
Max. input power of solar panel | 130W | 260W |
Transfer efficiency | ≤96% | ≤97% |
Rated charge/ discharge current | 10A |
No load loss | <15mA |
Max. input voltage of solar panel | <150V |
MPPT tracing efficiency | >99% |
Over voltage protection | 16.5V | 33.0V |
Limited charge voltage | 15.5V | 31.0V |
Equalizing charge voltage | 15.2V | 30.4V |
Equalizing charge interval | 30 days |
Boosting charge voltage | 14.4V | 28.8V |
Floating charge voltage | 13.8V | 27.6V |
Over-discharge recover voltage | 12.5V | 25.0V |
Over discharge voltage | 11.0V | 22.0V |
Boosting charge time | 2 hours |
Equalizing charge time | 1 hour |
Over temperature protection | Yes |
Light-operated voltage (on) | 5V |
Light-operated voltage (off) | 6V |
Light-operated delay time | 5min |
Working temperature | -35℃~+65℃ |
Weight | 430g |
Altitude | ≤3000m |
Dimension | 143*71*37.4 (mm) |
Installation dimension | 139*48(mm) |
Overload protection | Load current≥1.25 times rated current, cut off the load within 10
seconds; Load current≥1.5 times rated current, cut off the load
within 5 seconds |
Protections | 1.Reverse connection. 2.Inner over temperature. 3.The voltage of PV
input terminal is over value. 4.Over load 5.Reverse charging
protection at night. 6. TVS lightning protection 7. Waterproof: IP
64 |
Detail of SR-MT2410
